EZ36

Find a Dealer

Technical Data

Metric Imperial
Superstructure turning speed 9,5 1/min 9,5 1/min
Travel speed 2,9 m/H 4,7 km/h
Breakout force 7.868,3 lbf 35 kN
Tearout force 4.743,5 lbf 21,1 kN
Length 216,9 in 5.508 mm
Operating weight (min.-max.) 8.196,8 - 10.901,9 lb 3.718 - 4.945 kg
Digging depth (max.) 137,7 in 3.497 mm
Width 68,9 in 1.750 mm
Height 106,7 in 2.711 mm
Cylinder 3
Cylinder capacity 100,2 in³ 1.642 cm³
Inclined position max. 30 ° 30 °
Effective power 24,4 hp 18,2 kW
Nominal Engine speed 2.400 1/min 2.400 1/min
Battery capacity (nom. value) 71 Ah 71 Ah
Engine type Diesel engine
Fuel HVO EN15940
Exhaust-gas limit EU Stage V
Engine Manufacturer Yanmar
Engine Designation 3TNV88
Operating pressure hydraulics 3.480 psi 240 bar
Flow rate max. 31,7 gal/mi 120 l/min
Operating pressure slewing gear 195 bar 195 bar
Hydraulicpump Axial piston and 2 gear pumps
Shipping weight 7.780,1 lb 3.529 kg
Traction drive Axialpistonmotor with RGU

Engines

Metric Imperial
Cylinder 3
Cylinder capacity 100,2 Inch3 1.642 cm³
Effective power 29,8 hp 22,2 kW
Nominal Engine speed 2.400 1/min
Starter battery Voltage 12 µg/l
Stroke 3,5 in 90 mlai
Bore 3,5 in 88 mlai
Engine type Diesel engine
Exhaust-gas limit EPA3
Engine Manufacturer Yanmar
Engine Designation 3TNV88
Cylinder 3
Cylinder capacity 100,2 Inch3 1.642 cm³
Effective power 24,4 hp 18,2 kW
Nominal Engine speed 2.400 1/min
Maximum torque 64,7 lb/ft 87,8 Nm
Stroke 3,5 in 90 mlai
Bore 3,5 in 88 mlai
Engine type Diesel engine
Fuel Diesel EN 590
Exhaust-gas limit EU Stage V
Engine Manufacturer Yanmar
Engine Designation 3TNV88
  • Please note that the product range may vary depending on the country. Under certain circumstances, the contents / products shown here may not be available in your country. The illustrations, equipment, and data shown may also differ from the current product range in your country. Optional extras may be shown that are subject to an additional charge. Subject to changes.
  • With the selection of different options, the technical data of the products can vary accordingly. Please note that equipment cannot be changed for editions.
  • The engines shown may differ from the current delivery range in your country. Special equipment is depicted here that may be subject to extra charge. Subject to change without notice.

Product Inquiry

We process your data to handle your request and, where applicable, to take pre-contractual steps pursuant to Art. 6(1)(b) GDPR. Mandatory fields are required to process your request. For more information, please see our privacy policy.
* Mandatory fields
Contact Contact

Contact

Phone number: +34-916757525

Fill out the contact form Fill out the contact form

Find a dealer Find a dealer